XD Falcon Engine Conversion
A little project I have been working on lately is my XD Fairmont Ghia. The car was ‘handed down’ I suppose you would say after my grandfather passed away, well actually nobody else in the family wanted it! Anyway, the old 4.1 crossflow and 3-speed auto just wasn’t doing it for me so I got [...]
Pajero ECU Fault Code Check
In this article we are taking a look at how to extract ecu fault codes for the Mitsubishi Pajero V6. This information covers the NF, NG, NH and NJ models. To extract the codes on the Pajero you will need either a analogue volt meter or LED test light. The volt meter or test light [...]
Pajero V6 Timing Check And Adjust
This article covers checking and adjusting the ignition timing on NF, NG, NH and NJ model Pajero’s fitted with the 3.0 V6 engine. Before checking or making any adjustments to the timing the Timing Check Connector must be earthed. A length of electrical wire with small alligator clips on each end is handy for this, [...]
How To Replace Falcon Front Brake Pads
Today we are looking at how to replace the front brake pads on a Ford Falcon. The vehicle that we are using for this article is a 1999 model AU, however if my memory serves me correctly the same front brake setup is used from the EA up to the last of AU’s, as well as [...]
How To Replace Welch Plugs
In this article we are going to take a look at what is involved in replacing welch plugs, otherwise known as freeze plugs, expansion plugs or welsh plugs with an ‘s’. What we are doing with this article is covering only the actual removal and replacement of a welch plug itself on a scrap engine, [...]
